Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Danbury: What to Know First
As an independent Olympia Chimney service provider, Hearthstone Chimney Co. repairs and replaces Olympia Chimney liners and rebuilds damaged chimney structures throughout Danbury and Fairfield County. Most Olympia Chimney liner replacements and partial rebuilds are completed in a single visit after our Level-2 camera inspection confirms exactly what needs doing. We do not quote work we cannot document with photos you can see, and we do not upsell full rebuilds when a targeted liner repair will solve the problem safely.
This page is for Danbury homeowners who know they have an Olympia Chimney liner installed, or whose sweep identified “Olympia” stamped on a damaged component and recommended replacement. If that sounds like your situation, call us at (475) 375-9457. A live person answers, and estimates are free.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless steel flexible liners (standard-duty series) develop creosote buildup at the flex points faster than rigid equivalents, especially in Danbury’s cold-start shoulder seasons when homeowners fire the stove intermittently. The corrugations trap condensation that mixes with creosote into an acidic paste. We pull the liner, assess wall thinning with a borescope, and replace with either an Olympia-compatible heavy-duty flex or a DuraFlex equivalent rated for the appliance’s actual output, not the nominal rating.
- Olympia Chimney smooth-wall rigid liners (premium series) separate at the seam joints after 15-20 years of freeze-thaw cycling, a real problem in Danbury where temperature swings of 40 degrees in a single January day are common. The gap looks minor from below but creates a bypass for combustion gases. We cut back to sound metal, install a new Olympia or Gelco rigid section with proper expansion joints, and pressure-test before signing off.
- Olympia Chimney oval-to-round adapters crack at the weld where the geometry changes stress concentration, particularly on installations where the original mason sized the flue for a fireplace insert that was later swapped for a higher-BTU unit. We fabricate a proper transition or source the correct Olympia adapter rather than forcing a generic sleeve that voids any remaining warranty coverage.
- Olympia Chimney terra cotta flue tile systems in pre-1980s Danbury colonials spall and flake from the inside when a later Olympia liner retrofit was sized too small for the appliance, causing excessive flue gas temperatures against the remaining tile. We remove the damaged tile course, reline with a correctly sized Olympia or HeatShield system, and document the before-and-after for the homeowner’s records.
- Olympia Chimney top-sealing dampers integrated with liner top plates seize in the closed position after years of creosote hardening in the hinge mechanism, a failure mode we see frequently in Danbury homes that burn green or unseasoned hardwood. The homeowner smells smoke on first fire of the season. We disassemble, clean or replace the damper assembly, and verify full opening range with a mirror inspection from below.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers at (475) 375-9457. We ask what you’re seeing, what appliance you have, and whether you know the liner brand. “Tell me what you’re seeing, and I’ll tell you what it actually means.”
- 2
Level-2 camera inspection. Our technician runs a video camera the full length of the flue, photographs every defect, and records measurements for liner diameter, length, and any offsets. You watch the footage with us and get a plain-English verdict.
- 3
Parts decision. If Olympia Chimney OEM is available and cost-competitive, we quote it. If lead times are long or the original series is discontinued, we specify a DuraFlex, Gelco, or HeatShield equivalent that matches or exceeds the original spec. We explain the trade-off and let you decide.
- 4
The repair. Our background-checked, uniformed crew completes most liner replacements and partial rebuilds in one visit. We protect your floors, contain debris, and work methodically. No shortcuts.
- 5
Testing and documentation. We pressure-test or smoke-test every liner installation, provide photos of the completed work, and leave you with a written report and your 90-Day Done Right Promise.
- 6
Cleanup and follow-up. We haul away all debris, run a magnet sweep for fasteners, and check in within two weeks to confirm everything is performing as expected.
What Olympia Chimney Chimney Liner & Rebuild Costs in Danbury
These are real ranges for Olympia Chimney work we have completed in Danbury and nearby Fairfield County homes within the past 18 months. Your exact estimate depends on what the camera shows.
- Olympia Chimney flexible liner replacement (standard gas appliance): $1,800 - $2,800
- Olympia Chimney flexible liner replacement (wood-burning, heavy-duty): $2,400 - $3,600
- Olympia Chimney smooth-wall rigid liner repair (partial section): $1,200 - $2,200
- Olympia Chimney oval-to-round adapter replacement with labor: $650 - $1,100
- Partial chimney rebuild (above roofline, with new Olympia liner): $4,500 - $7,500
- Full chimney rebuild with Olympia liner system: $8,500 - $14,000
What moves the price: accessibility (steep roof pitch, tight clearances to neighbors on Danbury’s narrower lots), whether the existing liner can be extracted or must be demolished in place, and whether the appliance itself needs reconnection to code. We give you the full number before any work begins. Call (475) 375-9457 for an exact quote - estimates are free.
Why Danbury Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been answering the phone with a live person for over 42 years, and we plan to be here when your next question comes up. The 90-Day Done Right Promise is in writing, no arguing - if it’s not right, we come back. Our technicians are background-checked, uniformed, and trained on Olympia Chimney systems specifically, not just generic stainless flex. When an Olympia part is back-ordered or discontinued, we have working relationships with DuraFlex, HeatShield, and Gelco suppliers to keep your job moving without substituting builder-grade materials. Photos you can see, a plain-English verdict, and a square deal: no surprises on the bill.
FAQs
Using an independent service provider like Hearthstone Chimney Co. does not automatically void your Olympia Chimney warranty, but installing non-OEM replacement parts without manufacturer approval can limit coverage on remaining components. We document every parts decision in writing so you know exactly what is OEM and what is a quality equivalent before we proceed. Call (475) 375-9457 for an exact quote - estimates are free.
Most Olympia Chimney liner replacements are completed in a single day, with the technician arriving between 8 and 9 a.m. and finishing by mid-afternoon. Full chimney rebuilds typically require two to three days, plus a follow-up inspection after the mortar has cured. We schedule only what we can finish properly.
Localized damage to an Olympia Chimney liner, such as a cracked top plate or separated joint, can often be repaired with a targeted section replacement. We recommend full replacement when the camera shows wall thinning exceeding 25 percent, multiple perforations, or deterioration below the roofline where access makes reliable repair impractical. Nothing is recommended without camera evidence you can see for yourself.
Olympia Chimney continues to produce liners and components, but specific series from the 1990s and early 2000s have been superseded by updated designs. We maintain supplier relationships for active Olympia lines and stock compatible DuraFlex, Gelco, and HeatShield equivalents for discontinued series that match or exceed original specifications. We never leave a job waiting on a part we cannot source within a reasonable timeframe.
Targeted Olympia Chimney liner repairs in Danbury typically range from $650 for a top assembly replacement to $2,200 for a partial rigid section repair, with full liner replacements starting around $1,800. The camera inspection determines whether repair or replacement is the sounder investment. Call (475) 375-9457 for an exact quote - estimates are free.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Danbury and nearby areas.